This original cat uses a four-growth-round head and a three-growth-round body, joined through matching twelve-position necks. Two small cone ears, two arms, two legs and one long tube tail bring the inventory to nine copies. The head contains 186 single-crochet outputs and the body 120. Each ear uses twenty-three, each arm thirty, each leg twenty-four and the tail fifty-four. Including the required pairs gives 514 crochet outputs before embroidery and sewing.
Prepare the two different kinds of joins
The head and body keep their final neck rims open. The ears, arms, legs and tail have their opposing rim positions paired and sewn closed first. Their later attachment seams then connect those flat edges to identified receiving rounds. Eight seams connect all nine copies. The tail is a six-position tube with eight even rounds after its start, unlike the three-increase taper used by the fox case. Pin it at the recorded back position before deciding the face orientation.
Embroider actual almond paths and whiskers
The twenty-four-position head has ten worked rounds, so its eye line is round five. Eye centers are nine and fifteen around front center twelve. The cat guide supplies upper and lower almond curves, a small triangular nose, a split mouth and six separate whisker lines. Those whiskers are surface embroidery with counted landmarks. They are not protruding wire or unlisted crocheted pieces. Use the actual coordinate routes below and compare temporary strands before securing the expression.
FAQ and assembly checks
Why does the ear have an extra reduction?
Its cone grows to nine, then reduces once to eight so the flattened rim has four opposing pairs.
Does one tail diagram mean two tails?
No. Its quantity is one; only ears, arms and legs are paired.
Can I hide an uneven leg inside the body?
Compare both copies and correct their round counts or tension before attachment. Moving one seam deeper would change the saved orientation and proportions.
Is this a licensed character?
It is a geometric animal study with its own listed component inventory and counted embroidery.
Exact settings and the complete original construction
Open the Amigurumi Creature Pattern Generator, choose cat and four head growth rounds. The head and body proportions, small components, quantities and receiving references then follow this specific construction. Use smooth compatible yarns, a hook producing firm fabric, filling, removable markers, a tapestry needle and scissors. Download the complete creature project JSON before changing the scale or palette. These are counted design studies; no physical sample or certified finished size is claimed.
Work each component in its own continuous spiral. In US terms an increase makes two sc in one old base and sc2tog consumes two bases for one output; UK mode uses dc and dc2tog with the same budgets. Move the first-stitch marker and follow each part's local round numbering. Preserve open twelve-position necks until their matching seam, close flat rims into the listed opposing pairs and keep crochet totals separate from sewing pairs and embroidery landmarks. Pin all copies, check front and back, then reinforce the stated seams and conceal each tail. Read the amigurumi shaping guide and assess actual gauge, filling and attachment fit before relying on the result for a finished project.
Every component round, attachment and embroidery path
Head (make 1), round 1, base yarn #C99252: Magic ring: ch 1 (not counted), 6 sc. Tighten ring and mark first stitch. Continue in a spiral without joining or turning. [6 outputs per copy]
Head (make 1), round 2, base yarn #C99252: Repeat [0 sc, 2 sc in next stitch] 6 times. Each increase makes two stitches in one old base. [12 outputs per copy]
Head (make 1), round 3, base yarn #C99252: Repeat [1 sc, 2 sc in next stitch] 6 times. Each increase makes two stitches in one old base. [18 outputs per copy]
Head (make 1), round 4, base yarn #C99252: Repeat [2 sc, 2 sc in next stitch] 6 times. Each increase makes two stitches in one old base. [24 outputs per copy]
Head (make 1), round 5, base yarn #C99252: Sc once in each old stitch; move the first-stitch marker. [24 outputs per copy]
Head (make 1), round 6, base yarn #C99252: Sc once in each old stitch; move the first-stitch marker. [24 outputs per copy]
Head (make 1), round 7, base yarn #C99252: Sc once in each old stitch; move the first-stitch marker. [24 outputs per copy]
Head (make 1), round 8, base yarn #C99252: Sc once in each old stitch; move the first-stitch marker. [24 outputs per copy]
Head (make 1), round 9, base yarn #C99252: Repeat [2 sc, sc2tog over next two stitches] 6 times. Each decrease consumes two old bases and makes one stitch. Add filling before the opening becomes too small. [18 outputs per copy]
Head (make 1), round 10, base yarn #C99252: Repeat [1 sc, sc2tog over next two stitches] 6 times. Each decrease consumes two old bases and makes one stitch. Add filling before the opening becomes too small. Fasten off with a long sewing tail. Keep the twelve-stitch rim open for the matching attachment; add filling before the seam closes. [12 outputs per copy]
Body (make 1), round 1, base yarn #C99252: Magic ring: ch 1 (not counted), 6 sc. Tighten ring and mark first stitch. Continue in a spiral without joining or turning. [6 outputs per copy]
Body (make 1), round 2, base yarn #C99252: Repeat [0 sc, 2 sc in next stitch] 6 times. Each increase makes two stitches in one old base. [12 outputs per copy]
Body (make 1), round 3, base yarn #C99252: Repeat [1 sc, 2 sc in next stitch] 6 times. Each increase makes two stitches in one old base. [18 outputs per copy]
Body (make 1), round 4, base yarn #C99252: Sc once in each old stitch; move the first-stitch marker. [18 outputs per copy]
Body (make 1), round 5, base yarn #C99252: Sc once in each old stitch; move the first-stitch marker. [18 outputs per copy]
Body (make 1), round 6, base yarn #C99252: Sc once in each old stitch; move the first-stitch marker. [18 outputs per copy]
Body (make 1), round 7, base yarn #C99252: Sc once in each old stitch; move the first-stitch marker. [18 outputs per copy]
Body (make 1), round 8, base yarn #C99252: Repeat [1 sc, sc2tog over next two stitches] 6 times. Each decrease consumes two old bases and makes one stitch. Add filling before the opening becomes too small. Fasten off with a long sewing tail. Keep the twelve-stitch rim open for the matching attachment; add filling before the seam closes. [12 outputs per copy]
Ears (make 2), round 1, base yarn #2C2827: Magic ring: ch 1 (not counted), 6 sc. Mark first stitch and continue in a spiral; do not join or turn. [6 outputs per copy]
Ears (make 2), round 2, base yarn #2C2827: Repeat [1 sc, 2 sc in next stitch] 3 times. Each increase makes two stitches in one old base. [9 outputs per copy]
Ears (make 2), round 3, base yarn #2C2827: Sc2tog over the first two stitches, then sc once in each remaining old stitch. This single reduction makes the rim even for pairing. Fasten off with a sewing tail. Flatten the open 8-stitch rim, pair stitches 1 with 8, 2 with 7, and continue for 4 pairs. Sew each pair once without adding a crochet round; conceal the tail securely. [8 outputs per copy]
Arms (make 2), round 1, base yarn #C99252: Magic ring: ch 1 (not counted), 6 sc. Tighten ring and mark first stitch. Continue in a spiral without joining or turning. [6 outputs per copy]
Arms (make 2), round 2, base yarn #C99252: Sc once in each old stitch; move the first-stitch marker. [6 outputs per copy]
Arms (make 2), round 3, base yarn #C99252: Sc once in each old stitch; move the first-stitch marker. [6 outputs per copy]
Arms (make 2), round 4, base yarn #C99252: Sc once in each old stitch; move the first-stitch marker. [6 outputs per copy]
Arms (make 2), round 5, base yarn #C99252: Sc once in each old stitch; move the first-stitch marker. Fasten off with a sewing tail. Flatten the open 6-stitch rim, pair stitches 1 with 6, 2 with 5, and continue for 3 pairs. Sew each pair once without adding a crochet round; conceal the tail securely. [6 outputs per copy]
Legs (make 2), round 1, base yarn #C99252: Magic ring: ch 1 (not counted), 6 sc. Tighten ring and mark first stitch. Continue in a spiral without joining or turning. [6 outputs per copy]
Legs (make 2), round 2, base yarn #C99252: Sc once in each old stitch; move the first-stitch marker. [6 outputs per copy]
Legs (make 2), round 3, base yarn #C99252: Sc once in each old stitch; move the first-stitch marker. [6 outputs per copy]
Legs (make 2), round 4, base yarn #C99252: Sc once in each old stitch; move the first-stitch marker. Fasten off with a sewing tail. Flatten the open 6-stitch rim, pair stitches 1 with 6, 2 with 5, and continue for 3 pairs. Sew each pair once without adding a crochet round; conceal the tail securely. [6 outputs per copy]
Long tail (make 1), round 1, base yarn #2C2827: Magic ring: ch 1 (not counted), 6 sc. Tighten ring and mark first stitch. Continue in a spiral without joining or turning. [6 outputs per copy]
Long tail (make 1), round 2, base yarn #2C2827: Sc once in each old stitch; move the first-stitch marker. [6 outputs per copy]
Long tail (make 1), round 3, base yarn #2C2827: Sc once in each old stitch; move the first-stitch marker. [6 outputs per copy]
Long tail (make 1), round 4, base yarn #2C2827: Sc once in each old stitch; move the first-stitch marker. [6 outputs per copy]
Long tail (make 1), round 5, base yarn #2C2827: Sc once in each old stitch; move the first-stitch marker. [6 outputs per copy]
Long tail (make 1), round 6, base yarn #2C2827: Sc once in each old stitch; move the first-stitch marker. [6 outputs per copy]
Long tail (make 1), round 7, base yarn #2C2827: Sc once in each old stitch; move the first-stitch marker. [6 outputs per copy]
Long tail (make 1), round 8, base yarn #2C2827: Sc once in each old stitch; move the first-stitch marker. [6 outputs per copy]
Long tail (make 1), round 9, base yarn #2C2827: Sc once in each old stitch; move the first-stitch marker. Fasten off with a sewing tail. Flatten the open 6-stitch rim, pair stitches 1 with 6, 2 with 5, and continue for 3 pairs. Sew each pair once without adding a crochet round; conceal the tail securely. [6 outputs per copy]
Pin Head 1 to Body 1; matching open rims. Use the source's final round 10. Align the two twelve-stitch openings with both right sides outward; pin four quarter points before sewing. Match source rim positions 1–12 in order to receiving round 8, stitches 12, 11, 10, 9, 8, 7, 6, 5, 4, 3, 2, 1. Sew 12 pairs once, then reinforce that same seam without adding crochet stitches. Add filling before the last gap closes and conceal the tail. Check orientation and actual fit before permanent attachment. [12 attachment pairs]
Pin Ears 1 to Head 1; flattened ear edge. Use the source's final round 3. Keep the flattened paired edge closed; the following seam attaches it to the receiving surface. Match source paired edge positions 1–4 in order to receiving round 2, stitches 2, 3, 4, 5. Sew 4 pairs once, then reinforce that same seam without adding crochet stitches. Add filling before the last gap closes and conceal the tail. Check orientation and actual fit before permanent attachment. [4 attachment pairs]
Pin Ears 2 to Head 1; flattened ear edge. Use the source's final round 3. Keep the flattened paired edge closed; the following seam attaches it to the receiving surface. Match source paired edge positions 1–4 in order to receiving round 2, stitches 8, 9, 10, 11. Sew 4 pairs once, then reinforce that same seam without adding crochet stitches. Add filling before the last gap closes and conceal the tail. Check orientation and actual fit before permanent attachment. [4 attachment pairs]
Pin Arms 1 to Body 1; flattened arm edge. Use the source's final round 5. Keep the flattened paired edge closed; the following seam attaches it to the receiving surface. Match source paired edge positions 1–3 in order to receiving round 7, stitches 3, 4, 5. Sew 3 pairs once, then reinforce that same seam without adding crochet stitches. Add filling before the last gap closes and conceal the tail. Check orientation and actual fit before permanent attachment. [3 attachment pairs]
Pin Arms 2 to Body 1; flattened arm edge. Use the source's final round 5. Keep the flattened paired edge closed; the following seam attaches it to the receiving surface. Match source paired edge positions 1–3 in order to receiving round 7, stitches 12, 13, 14. Sew 3 pairs once, then reinforce that same seam without adding crochet stitches. Add filling before the last gap closes and conceal the tail. Check orientation and actual fit before permanent attachment. [3 attachment pairs]
Pin Legs 1 to Body 1; flattened leg edge. Use the source's final round 4. Keep the flattened paired edge closed; the following seam attaches it to the receiving surface. Match source paired edge positions 1–3 in order to receiving round 1, stitches 6, 1, 2. Sew 3 pairs once, then reinforce that same seam without adding crochet stitches. Add filling before the last gap closes and conceal the tail. Check orientation and actual fit before permanent attachment. [3 attachment pairs]
Pin Legs 2 to Body 1; flattened leg edge. Use the source's final round 4. Keep the flattened paired edge closed; the following seam attaches it to the receiving surface. Match source paired edge positions 1–3 in order to receiving round 1, stitches 3, 4, 5. Sew 3 pairs once, then reinforce that same seam without adding crochet stitches. Add filling before the last gap closes and conceal the tail. Check orientation and actual fit before permanent attachment. [3 attachment pairs]
Pin Long tail 1 to Body 1; flattened tail base. Use the source's final round 9. Keep the flattened paired edge closed; the following seam attaches it to the receiving surface. Match source paired edge positions 1–3 in order to receiving round 4, stitches 17, 18, 1. Sew 3 pairs once, then reinforce that same seam without adding crochet stitches. Add filling before the last gap closes and conceal the tail. Check orientation and actual fit before permanent attachment. [3 attachment pairs]
Head: embroider the cat expression after checking front orientation. cat placement trial on an existing head: mark front center stitch 12. Eyes are centered at stitches 9 and 15 on round 5; separation 6 stitch intervals (5 numbered positions strictly between). left-upper-eye: couch a curve from (8.35, R5) through control (9, R4.3) to (9.65, R5); yarn slot 2. left-lower-eye: couch a curve from (8.35, R5) through control (9, R5.45) to (9.65, R5); yarn slot 2. right-upper-eye: couch a curve from (14.35, R5) through control (15, R4.3) to (15.65, R5); yarn slot 2. right-lower-eye: couch a curve from (14.35, R5) through control (15, R5.45) to (15.65, R5); yarn slot 2. nose: backstitch (11.4, R5.7) → (12.6, R5.7) → (12, R6.3), close to the first point; yarn slot 2. philtrum: backstitch (12, R6.3) → (12, R6.7); yarn slot 2. left-mouth: couch a curve from (11.2, R6.7) through control (11.6, R7.2) to (12, R6.7); yarn slot 2. right-mouth: couch a curve from (12, R6.7) through control (12.4, R7.2) to (12.8, R6.7); yarn slot 2. left-whisker-1: backstitch (7.5, R5.7) → (8.9, R6.15); yarn slot 2. right-whisker-1: backstitch (15.1, R6.15) → (16.5, R5.7); yarn slot 2. left-whisker-2: backstitch (7.5, R6.15) → (8.9, R6.15); yarn slot 2. right-whisker-2: backstitch (15.1, R6.15) → (16.5, R6.15); yarn slot 2. left-whisker-3: backstitch (7.5, R6.6) → (8.9, R6.15); yarn slot 2. right-whisker-3: backstitch (15.1, R6.15) → (16.5, R6.6); yarn slot 2. Fractional coordinates are between stitch or round markers; curve controls guide the shape and are not extra insertion points. Compare temporary threads on the stuffed head, then secure each separate strand inside without distorting the surface. This plan references 24 head positions; it does not make 24 new crochet stitches. The separate embroidery map refers only to this head's existing widest band; its head-color tint does not redraw any crochet colorwork patches. [24 head reference positions]
Separate counted embroidery projects
Open the Face Placement Planner with the matching companion below when comparing an expression. Its yarn roles describe that face subset; use the actual colors when matching the complete creature. Save changes as a separate comparison and deliberately transfer the chosen embroidery to the correct head.
