Character faces: Amigurumi Face Placement Planner

Three expressions at identical eye centers

This original study compares neutral, happy and sleepy embroidery on the same thirty-position, twelve-round reference. All eyes remain centered at stitches eleven and nineteen on round six. The front is stitch fifteen and the gap eight intervals. The changing expression therefore comes from the actual feature paths rather than shifting the head count, recoloring an identical picture or naming three otherwise indistinguishable patterns.

Inspect the neutral and happy drawings

The neutral trial uses compact eye ovals and a straight mouth from position 14.2 to 15.8 on round eight. It has no nose. The happy trial replaces the eyes with upward arches, each spanning 1.2 intervals at the eye line with its control 0.65 rounds above. Its lower smile extends from 13.5 to 16.5 on round 7.6, guided by center stitch fifteen on round 8.6. That control shapes a smooth curve instead of a backstitched corner.

Make the sleepy alternative visibly different

The sleepy eyes are horizontal lines from 10.4 to 11.6 and from 18.4 to 19.6 on round six. A small oval mouth is centered at stitch fifteen on round eight, with half-width 0.3 intervals and half-height 0.35 rounds. It is neither the straight neutral mouth nor the wide happy curve. Keep the actual yarn, viewing direction and stuffing unchanged when comparing the three temporary trials, so those construction differences remain the source of the expression.

FAQ and comparison mistakes

Should all three expressions be stitched together?

No. The panels describe mutually exclusive alternatives for the same existing head. Transfer one complete set at a time.

Can the tool identify a copyrighted character?

It provides these original geometric expression studies. It does not recognize reference pictures or supply a licensed character pattern.

Why does the sleepy mouth look like a dot?

Check its small oval extents and avoid tightening the outline into one puncture. Its dimensions are expressed in stitch intervals and rounds, not millimeters.

Do the neutral eyes use a different round?

No. All three plans keep round six. A change in eye height would introduce another variable and make this controlled expression comparison less useful.

Exact setup, compatible head reference and finishing

Open the Amigurumi Face Placement Planner and choose expressions, circumference 30, height 12 and eye separation 8. The reference below assumes an existing single-crochet head with six stitches in a magic ring, then six evenly distributed increases on each round until 30 stitches. Work three even rounds, then six evenly distributed decreases per round until six remain; close those final loops with the tail. This optional arithmetic reference has 12 worked rounds. Its maximum-count band provides a reference for the eye line and nearby feature anchors. Fractional curve controls are guide locations; check their position on the actual curved surface rather than assuming every referenced level has the maximum circumference. Swatch and finish a physical head before assessing the actual fit.

The placement tool generates embroidery instructions, not that head construction. Use a tapestry needle and suitable contrasting yarn, transfer temporary landmarks, then follow the complete paths below. Round coordinates increase downward on this unwrapped face map. Fractional locations lie between markers. Short backstitches follow straight paths; curved strands are couched to the drawn guide. Secure each separate tail inside without pulling the surface inward. Review the chart-reading guide and keep the exact project JSON with your chosen trial. US and UK modes retain the same coordinates. No physical crochet or toy certification is implied by the calculated example.

1. neutral placement trial on an existing head: mark front center stitch 15. Eyes are centered at stitches 11 and 19 on round 6; separation 8 stitch intervals (7 numbered positions strictly between). left-eye: embroider an oval centered at (11, R6), half-width 0.35 stitch intervals and half-height 0.35 rounds; yarn slot 2. right-eye: embroider an oval centered at (19, R6), half-width 0.35 stitch intervals and half-height 0.35 rounds; yarn slot 2. mouth: backstitch (14.2, R8) → (15.8, R8); yarn slot 2. Fractional coordinates are between stitch or round markers; curve controls guide the shape and are not extra insertion points. Compare temporary threads on the stuffed head, then secure each separate strand inside without distorting the surface. This plan references 30 head positions; it does not make 30 new crochet stitches. [30 existing head reference positions]
2. happy placement trial on an existing head: mark front center stitch 15. Eyes are centered at stitches 11 and 19 on round 6; separation 8 stitch intervals (7 numbered positions strictly between). left-eye: couch a curve from (10.4, R6) through control (11, R5.35) to (11.6, R6); yarn slot 2. right-eye: couch a curve from (18.4, R6) through control (19, R5.35) to (19.6, R6); yarn slot 2. smile: couch a curve from (13.5, R7.6) through control (15, R8.6) to (16.5, R7.6); yarn slot 2. Fractional coordinates are between stitch or round markers; curve controls guide the shape and are not extra insertion points. Compare temporary threads on the stuffed head, then secure each separate strand inside without distorting the surface. This plan references 30 head positions; it does not make 30 new crochet stitches. [30 existing head reference positions]
3. sleepy placement trial on an existing head: mark front center stitch 15. Eyes are centered at stitches 11 and 19 on round 6; separation 8 stitch intervals (7 numbered positions strictly between). left-eye: backstitch (10.4, R6) → (11.6, R6); yarn slot 2. right-eye: backstitch (18.4, R6) → (19.6, R6); yarn slot 2. mouth: embroider an oval centered at (15, R8), half-width 0.3 stitch intervals and half-height 0.35 rounds; yarn slot 2. Fractional coordinates are between stitch or round markers; curve controls guide the shape and are not extra insertion points. Compare temporary threads on the stuffed head, then secure each separate strand inside without distorting the surface. This plan references 30 head positions; it does not make 30 new crochet stitches. [30 existing head reference positions]