Continue an increasing base into an open cylindrical wall
This tote study begins with four six-sector SC growth rounds: six, twelve, eighteen and twenty-four. Their sum is sixty. Twelve even rounds at twenty-four add 288, giving 348 outputs in one continuous base-and-wall piece. Two four-by-thirty handles contribute 240 sc, bringing the total to 588 main outputs across three separately crocheted pieces.
Stop increasing when the wall begins
Start from the source magic ring and retain the first-stitch marker through the spiral. Each growth round adds six outputs using the distributed increase rule. After reaching twenty-four, work one sc in every old top for each of the twelve wall rounds. Continuing to increase would widen the wall rather than produce this supported open cylinder. Do not stuff or decrease the rim closed.
Use four separate receiving ranges on the final rim
The twenty-four-stitch final round has handle ranges one–four, seven–ten, thirteen–sixteen and nineteen–twenty-two. Attach handle one at the first two ranges and handle two at the last two. Match each four-stitch handle end to its four named receiving positions. Pin both loops, check for twists and reinforce sixteen attachment tacks while keeping the mouth open.
Assess the real base and carrying behavior
The unwrapped round chart records increases and wall continuity; it is not a photograph or a physical stiffness model. Compare the washed base, real wall height and handle loop length before using the sample. A correctly counted base can still cup or ruffle with unsuitable yarn, hook or tension. Additional support or lining needs its own measured construction decision.
Why are at least three growth rounds required here?
A twelve-stitch rim from two rounds cannot provide four disjoint four-position handle ranges. The named tote rejects that attachment geometry.
Does twelve wall rounds mean twelve rows to turn?
No. This source continues in spiral rounds without row turns, following its first-stitch marker.
Exact settings, stitch key and full original route
Open the Crochet Bag Panel Generator and choose round-base. Use width twenty-four, body rows twelve, gusset width five, strap rows thirty, flap rows six, base growth four, wall rounds twelve, motif frame setting two and bag cord foundation seventy-two. Enter measured SC gauges twenty stitches and twenty-four rows per ten centimeters. Inactive settings do not resize a fixed source. Download the complete original bag project JSON before making changes.
Use compatible yarn, a matching hook, removable part and corner markers, scissors and a tapestry needle. US sc means single crochet, dc double crochet, ch chain and sl st slip stitch; UK mode translates the stitch names without changing the source geometry or quantities. Follow the complete cluster and back-loop definitions where used. Component row counts describe one copy. Main crochet outputs, extra chains, sewing pairs, basting and threading references have different units. Review the gauge guide and chart-reading guide before comparing measurements and receiving edges.
The original SVG below shows the actual generated component charts and a linked assembly register. Written references supply the complete seam route. Stitch Preview draws corresponding loop schematics; neither view is a real photograph or proof of a physically tested bag. Wash and measure the actual fabrics, pin every seam, preserve the named opening and reinforce the stated attachments. Record real dimensions, yarn behavior and finishing alongside the saved JSON before deciding how the finished sample will be used.
All component rows, rounds, seams and attachment references
Continuous round base and open wall (make 1), round 1: Open cylinder (make 1), round 1, base yarn #4F7381: Magic ring: ch 1 (not counted), 6 sc. Tighten ring and mark first stitch. Continue in a spiral without joining or turning. [6 counted outputs per copy]
Continuous round base and open wall (make 1), round 2: Open cylinder (make 1), round 2, base yarn #4F7381: Repeat [0 sc, 2 sc in next stitch] 6 times. Each increase makes two stitches in one old base. [12 counted outputs per copy]
Continuous round base and open wall (make 1), round 3: Open cylinder (make 1), round 3, base yarn #4F7381: Repeat [1 sc, 2 sc in next stitch] 6 times. Each increase makes two stitches in one old base. [18 counted outputs per copy]
Continuous round base and open wall (make 1), round 4: Open cylinder (make 1), round 4, base yarn #4F7381: Repeat [2 sc, 2 sc in next stitch] 6 times. Each increase makes two stitches in one old base. [24 counted outputs per copy]
Continuous round base and open wall (make 1), round 5: Open cylinder (make 1), round 5, base yarn #4F7381: Sc once in each old stitch; move the first-stitch marker. [24 counted outputs per copy]
Continuous round base and open wall (make 1), round 6: Open cylinder (make 1), round 6, base yarn #4F7381: Sc once in each old stitch; move the first-stitch marker. [24 counted outputs per copy]
Continuous round base and open wall (make 1), round 7: Open cylinder (make 1), round 7, base yarn #4F7381: Sc once in each old stitch; move the first-stitch marker. [24 counted outputs per copy]
Continuous round base and open wall (make 1), round 8: Open cylinder (make 1), round 8, base yarn #4F7381: Sc once in each old stitch; move the first-stitch marker. [24 counted outputs per copy]
Continuous round base and open wall (make 1), round 9: Open cylinder (make 1), round 9, base yarn #4F7381: Sc once in each old stitch; move the first-stitch marker. [24 counted outputs per copy]
Continuous round base and open wall (make 1), round 10: Open cylinder (make 1), round 10, base yarn #4F7381: Sc once in each old stitch; move the first-stitch marker. [24 counted outputs per copy]
Continuous round base and open wall (make 1), round 11: Open cylinder (make 1), round 11, base yarn #4F7381: Sc once in each old stitch; move the first-stitch marker. [24 counted outputs per copy]
Continuous round base and open wall (make 1), round 12: Open cylinder (make 1), round 12, base yarn #4F7381: Sc once in each old stitch; move the first-stitch marker. [24 counted outputs per copy]
Continuous round base and open wall (make 1), round 13: Open cylinder (make 1), round 13, base yarn #4F7381: Sc once in each old stitch; move the first-stitch marker. [24 counted outputs per copy]
Continuous round base and open wall (make 1), round 14: Open cylinder (make 1), round 14, base yarn #4F7381: Sc once in each old stitch; move the first-stitch marker. [24 counted outputs per copy]
Continuous round base and open wall (make 1), round 15: Open cylinder (make 1), round 15, base yarn #4F7381: Sc once in each old stitch; move the first-stitch marker. [24 counted outputs per copy]
Continuous round base and open wall (make 1), round 16: Open cylinder (make 1), round 16, base yarn #4F7381: Sc once in each old stitch; move the first-stitch marker. Fasten off and weave the tail on the inside. Leave the final rim open; no cap or decrease round is supplied. Fasten off, weave in ends and block the completed motif without stretching. [24 counted outputs per copy]
Round tote handles (make 2), row 1: Ch 5. Starting in chain 2 from hook, work sc, sc, sc, sc. [4 counted outputs per copy]
Round tote handles (make 2), row 2: Ch 1, turn (turning chain does not count), work sc, sc, sc, sc. [4 counted outputs per copy]
Round tote handles (make 2), row 3: Ch 1, turn (turning chain does not count), work sc, sc, sc, sc. [4 counted outputs per copy]
Round tote handles (make 2), row 4: Ch 1, turn (turning chain does not count), work sc, sc, sc, sc. [4 counted outputs per copy]
Round tote handles (make 2), row 5: Ch 1, turn (turning chain does not count), work sc, sc, sc, sc. [4 counted outputs per copy]
Round tote handles (make 2), row 6: Ch 1, turn (turning chain does not count), work sc, sc, sc, sc. [4 counted outputs per copy]
Round tote handles (make 2), row 7: Ch 1, turn (turning chain does not count), work sc, sc, sc, sc. [4 counted outputs per copy]
Round tote handles (make 2), row 8: Ch 1, turn (turning chain does not count), work sc, sc, sc, sc. [4 counted outputs per copy]
Round tote handles (make 2), row 9: Ch 1, turn (turning chain does not count), work sc, sc, sc, sc. [4 counted outputs per copy]
Round tote handles (make 2), row 10: Ch 1, turn (turning chain does not count), work sc, sc, sc, sc. [4 counted outputs per copy]
Round tote handles (make 2), row 11: Ch 1, turn (turning chain does not count), work sc, sc, sc, sc. [4 counted outputs per copy]
Round tote handles (make 2), row 12: Ch 1, turn (turning chain does not count), work sc, sc, sc, sc. [4 counted outputs per copy]
Round tote handles (make 2), row 13: Ch 1, turn (turning chain does not count), work sc, sc, sc, sc. [4 counted outputs per copy]
Round tote handles (make 2), row 14: Ch 1, turn (turning chain does not count), work sc, sc, sc, sc. [4 counted outputs per copy]
Round tote handles (make 2), row 15: Ch 1, turn (turning chain does not count), work sc, sc, sc, sc. [4 counted outputs per copy]
Round tote handles (make 2), row 16: Ch 1, turn (turning chain does not count), work sc, sc, sc, sc. [4 counted outputs per copy]
Round tote handles (make 2), row 17: Ch 1, turn (turning chain does not count), work sc, sc, sc, sc. [4 counted outputs per copy]
Round tote handles (make 2), row 18: Ch 1, turn (turning chain does not count), work sc, sc, sc, sc. [4 counted outputs per copy]
Round tote handles (make 2), row 19: Ch 1, turn (turning chain does not count), work sc, sc, sc, sc. [4 counted outputs per copy]
Round tote handles (make 2), row 20: Ch 1, turn (turning chain does not count), work sc, sc, sc, sc. [4 counted outputs per copy]
Round tote handles (make 2), row 21: Ch 1, turn (turning chain does not count), work sc, sc, sc, sc. [4 counted outputs per copy]
Round tote handles (make 2), row 22: Ch 1, turn (turning chain does not count), work sc, sc, sc, sc. [4 counted outputs per copy]
Round tote handles (make 2), row 23: Ch 1, turn (turning chain does not count), work sc, sc, sc, sc. [4 counted outputs per copy]
Round tote handles (make 2), row 24: Ch 1, turn (turning chain does not count), work sc, sc, sc, sc. [4 counted outputs per copy]
Round tote handles (make 2), row 25: Ch 1, turn (turning chain does not count), work sc, sc, sc, sc. [4 counted outputs per copy]
Round tote handles (make 2), row 26: Ch 1, turn (turning chain does not count), work sc, sc, sc, sc. [4 counted outputs per copy]
Round tote handles (make 2), row 27: Ch 1, turn (turning chain does not count), work sc, sc, sc, sc. [4 counted outputs per copy]
Round tote handles (make 2), row 28: Ch 1, turn (turning chain does not count), work sc, sc, sc, sc. [4 counted outputs per copy]
Round tote handles (make 2), row 29: Ch 1, turn (turning chain does not count), work sc, sc, sc, sc. [4 counted outputs per copy]
Round tote handles (make 2), row 30: Ch 1, turn (turning chain does not count), work sc, sc, sc, sc. Fasten off, weave in ends and block the completed motif without stretching. [4 counted outputs per copy]
Keep the 24-stitch last cylinder round open. Mark four receiving ranges of four consecutive stitches starting at1, 7, 13, 19, wrapping modulo24 where necessary. Attach handle 1 at the first two ranges and handle 2 at the last two. Pin actual placement, avoid twisting and reinforce four ends, sixteen tacks. For small rims the named ranges may overlap; check physical clearance before use. [16 handle-to-open-rim tacks]
